Green Roof System "Sloped Sedum"

The system build-up “Sloped Sedum”, based on the ZinCo Georaster® elements, enables the installation of Green Roofs with slopes exceeding 20° and up to 35°. Above 35° special solutions can be designed by the ZinCo engineers.

The Georaster® elements are made of recycled polyethylene (HD-PE) and interlock without requiring tools, creating a stable structure. This structure is safely accessible and can be infilled with growing medium. The Georaster® elements cater for plenty of space for the plant root systems to establish and develop. The plant selection has to be well adapted to the extreme conditions of a sloped roof, where the solar radiation is the highest on the south facing roof side and the water run-off is much faster compared to a flat roof. The irrigation should be planned for, even if it is only needed in times of drought. It can avoid gaps in the vegetation coverage, which would lead to erosion. A transfer of existing shear forces into stable eaves and into additional shear barriers is necessary.

Georaster® elements can also be installed under reinforced lawns, footway constructions, in slope protection, etc.

System Build-Up

  • 1: Plant Community “Sloped Sedum”
  • 2: Growing Media “Zincoblend E” or “Zincoblend I”, depth: ca. 4.25 in.
    (ca. 110 mm)
    < 4/12 Zincoblend E
    > 4/12 Zincoblend I
  • 3: Drainage Element Georaster® Elements
  • 4: Protection Mat WSM 150
System Build-Up
  • 1
  • 2
  • 3
  • 4

Technical Data

Build-up height:
ca. 5 in.
Weight, saturated:
ca. 35 lbs/sq. ft.
Water storage capacity:
ca. 1.4 gal/sq. ft.

Standard Architectural Details:
Click to open pdf


Find more formats (.dxf, .dwg) in our download center.